To locate your weather station console and other components outside, use our
Complete System Shelter. Weather-resistant NEMA 4X enclosure provides protection
from the elements for all of the following:
Vantage Pro2 console or console/receiver with WeatherLink data logger.
Alarm Output Module ..
Heater and insulation fit neatly inside the rain
collector. For use in cold climates to measure
freezing rain or the moisture content of snowfall.
Requires access to AC power; cannot be run using
a solar power kit. Includes 24-watt, 24-volt heater
with thermal cut-off switch, control unit, insu..
The Davis Instruments Rain Collector Heater is used in cold climates to measure freezing rain or the moisture content of snowfall (equivalent precipitation). Without the heater, frozen precip is not measured until it melts. The Davis Weather 7720 requires access to AC power; may not be run using a s..
Includes waterproof coupler kits (not shown in photograph) for joining two
cables together. Use with wireless or cabled Vantage Pro2 or original Vantage
Pro, and WeatherLink for Vantage Pro2, Wizard, or Monitor.Also for use with:Anemometer
Temperature Sensor or Prob..
The Davis 7767 Surge Protector provides upgraded protection against lightning induced power surges, power-cross conditions, and ground potential rises, use surge protectors with any of the cabled weather stations. The Vantage Pro and Pro2 require two protectors for the connection between the anemom..
both the console (or Weather Envoy) and the outdooor sensors. Includes solar
panel, regulator circuit, rechargeable battery, 16 ft.' (4.9 m) cable, and
hardware to attach to a vertical mounting pole. Can also be used to power the
with both original Vantage Pro a..
use with wireless consoles or the Weather Envoy to make a stand-alone outdoor
system. Powers the wireless console/receiver or Weather Envoy. (Outdoor sensors
are powered by the solar panel that is included with the station).
solar panel, regulator circuit, rechargeable battery,..